Homepage | Products | Decor Products |
Rose Magic Touch Base Coat
Product Description
An excellent quality plastic emulsion Magic Touch base coat based on acrylic copolymer and some inert pigments. It is designed for the Magic Touch Top Coat.
Principal Uses
It is recommended for the use of most of the interior /exterior substrates like walls, ceilings of concretes, plasters, cement rendering, blocks, asbestos, plaster board and wood finishes. It is used as an excellent base coat with good color retention properties,alkali resistance.
Color |
White or any requested color |
Finish |
Flat |
Density (gm/cc) |
1.50 |
Volume Solids % |
38% |
Theoretical Spreading Rat |
12 sq. mt. / lt at 30 micron DFT(depends upon the substrate condition and method of application). |
Washability |
1000 – 1200 دورة |
Overcoat Interval |
4 hours |
Flash Point |
N/A |
Mixing Ratio |
N/A |
Pot Life |
N/A |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.Suitable for application to plaster, brick work, concrete, rendered surfaces and majority of the cement type building surfaces.
Application Details
Range |
Typical |
Max |
Min |
Wet Film Thickness (micron) |
120 |
150 |
90 |
Dry Film Thickness (micron) |
45 |
57 |
30 |
Temperature |
15oC |
25oC |
40oC |
Drying Time (S/D) |
2 hours |
1 hour |
30 minutes |
Dry Time (H/D) |
8 hours |
4 hours |
2 hour |
Application Guidelines
|
Air spray / Airless spray |
Brush/Roller |
Type of Thinner |
Clean water |
Clean water |
Volume of Thinner |
0 - 5% 0 - 5% |
5 - 10% |
Nozzle Orifice |
0.022 1.5-2.0mm |
3 – 5 bar 2100 psi |
Nozzle Pressure |
- |
- |
Paint System Advice
• Apply 1 coat of Rose Acrylic Sealer ( RS-6499 ).
• W/B plastic putty ( Rose No. RS-6350 ) can be applied and which can be sanded, cleaned and dried before the application of further coats.
• On dried and cleaned surface of putty coat following application will be made :
a) 1 coat of tex coat need to apply followed by sanding .
b) 1 coat of Rose Magic Touch Base Coat (RS-6888) is applied as intermediate
coat over which Rose Magic Touch Top Coat (RS-6889) can be applied.
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use.
