Homepage | Products | Decor Products |

Rose Royal Top Coat

Add to cartPrint

RS-6886

Rose Royal Top Coat

A premium quality water based design paint which provideds wonderful effects for interior decoration on walls.It is constitutedwith various components to provide attractive colors on the walls with sparkling effects.

Royal is specially designed for interior decoration and readily used on walls, plasters, concretes, gypsum boards, plywoods etc. It is highly recommended for producing excellent sparkling effects on the interior walls of Palaces, Museums, Villas, Mosques, Restaurants, Art Gallaries etc.

Color

Any color of silver finish

Finish

Lustrous

Density (gm/cc)

1.086

Volume Solids %

20%

Theoretical Spreading Rat

7-8 sq.mt/ lt. (depends upon the substrate condition & method of application)

Washability

N/A

Overcoat Interval

N/A

Flash Point

N/A

Mixing Ratio

N/A

Pot Life

N/A

The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.

Should be stable, firm,dry and free from laitance, dust and loose flaking materials, loose old paints, dirt, grease, wax and any other contaminations. Following steps of applications are required :
a) Apply one coat of primer sealer.
b) Apply putty to make the surface smooth.

Range

Typical

Max

Min

Wet Film Thickness (micron)

150

200

100

Dry Film Thickness (micron)

30

40

20

Temperature

15oC

25oC

40oC

Drying Time (S/D)

2 hours

1 hour

30 minutes

Dry Time (H/D)

6 hours

3 hours

2 hour

Air spray / Airless spray

Brush/Roller

Type of Thinner

-

Clean water

Volume of Thinner

-

Ready for use

Nozzle Orifice

-

-

Nozzle Pressure

-

-

• Apply 1 coat of Rose primer sealer before the application of putty coat.
• Apply Rose putty over the over the primer sealer( RS-6498) for the smooth finish.
• Apply the following coats over the pre-coated with primer and putty:
a) 1-2 coats of Royal base coat by roller.
b) 1 coat of Royal top coat by roller or by design knife.

• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use.

اتصل بنا

هاتف : 6244666 02 966+    فاكس : 6244666 02 966+    صندوق بريد : جدة، المملكة العربية السعودية    بريد إلكتروني : info@rose.com.sa





×
×
أصف للطلبطباعة هذه الصفحة

RS-6498

روز سيلر داخلي

دهان أساس مائي مؤسس على مستحلب الأكريليك املشن.

يستعمل في الداخل على الجدران و الأسقف والأسطح الاسمنتيه والخشبية.

Color

White or any requested color

Finish

Flat

Density (gm/cc)

1.48

Volume Solids %

34%

Theoretical Spreading Rat

11 - 12 متر مربع / لتر عند سماكة 30 ميكرون ( يعتمد على نوع السطح و طريقة التنفيذ )

Washability

200 – 300 دورة

Overcoat Interval

4 hours

Flash Point

N/A

Mixing Ratio

N/A

Pot Life

N/A

The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.

يجب ان يكون السطح نظيفا وجافا وخاليا من أي شوائب أو أغبرة أو زيوت أو تلوثات , ويجب ازالة الدهانات القديمة والمتقشرة .

Range

Typical

Max

Min

Wet Film Thickness (micron)

100

120

100

Dry Film Thickness (micron)

30

40

30

Temperature

15oC

25oC

40oC

Drying Time (S/D)

4 hours

1 hour

30 minutes

Dry Time (H/D)

8 hours

4 hours

2 hours

Air spray / Airless spray

Brush/Roller

Type of Thinner

Clean water

Clean water

Volume of Thinner

0 – 5%   0 – 5%

5 – 10%

Nozzle Orifice

0.022   1.5-2.0mm

-

Nozzle Pressure

2100 psi   3 – 5 bar

-

• عمل 1 طبقة روز ماسونري برايمر (RS-6498).
• عمل 1 – 2 طبقة روز معجون (RS-6350) على سطح نظيف وخالي من الأوساخ والأتربة.
• عمل الطبقة النهائية حسب الدهان المراد طلائه.

• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use.