Homepage | Products | Decor Products |
Rose Royal Base Coat
Product Description
A high quality Rose Royal base coat plastic emulsion paint based on acrylic emulsion and some inert pigments. It is specially designed for Rose Royal Top Coat.
Principal Uses
It is recommended for the interior and exterior surfaces like concretes , plasters, cement rendering, blocks, asbestos, plaster board, wood finishes etc. This product has very good weather resistance and excellent scrub resistance. It is easily washable with water.It provides egg-shell finish, good color retention and good hiding power.
Color |
White or any requested color |
Finish |
Egg-Shell |
Density (gm/cc) |
1.31 |
Volume Solids % |
35% |
Theoretical Spreading Rat |
11-12 sq. mt/ lt at 30 micron DFT(depends upon the substrate condition & method of application) |
Washability |
Above 2000 cycles |
Overcoat Interval |
4 hours |
Flash Point |
N/A |
Mixing Ratio |
N/A |
Pot Life |
N/A |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.
Application Details
Range |
Typical |
Max |
Min |
Wet Film Thickness (micron) |
180 |
210 |
180 |
Dry Film Thickness (micron) |
25 |
30 |
25 |
Temperature |
15oC |
25oC |
40oC |
Drying Time (S/D) |
3 hours |
1 hours |
30 minutes |
Dry Time (H/D) |
12 hours |
4 hours |
2 hour |
Application Guidelines
|
Air spray / Airless spray |
Brush/Roller |
Type of Thinner |
Clean water |
Clean water |
Volume of Thinner |
0 – 5% 10 – 15% |
5 – 10% |
Nozzle Orifice |
0.022 1.5-2.0mm |
- |
Nozzle Pressure |
2100 psi 3 – 5 bar |
- |
Paint System Advice
• Apply 1 coat of Rose Masonry Primer ( RS-6498 ) / equivalent primer sealer.
• Water based putty ( RS-6350 ) can be applied and which can be sanded ,cleaned and dried before the application of top coat finishes.
• On dried and cleaned surface of putty coat following application can be made:
a) 1 coat of Rose Fancy Tex and 1 coat of Royal Base Coat . Otherwise 1 coat of Royal Base Coat (RS-6885 ) can be applied directly.
b) A Royal Top Coat ( RS-6886) can be applied.
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use.
