Homepage | Products | Decor Products |

Rose Marblita Stucco

Add to cartPrint

RS-6398

Rose Marblita Stucco

A premium quality water based stucco which provides wonderful effects for interior decorationon walls. It is constituted with two different components to provide varous attractive colors on the wall with magical marble effects.

Marblita stucco is specially designed for the interior decoration and readily used on the walls, plasters, concrete, gypsum board, woodboard etc. It is highly recommended for producing excellent marble effects on the interior walls of Palaces, Museums, Villas, Mosques, Restaurant, Art Galleries etc.

Color

White or any requested color

Finish

Marble finish

Density (gm/cc)

1.78

Volume Solids %

50%

Theoretical Spreading Rat

1.2 - 2.0 sq.mt./ kg (depends upon the substrate condition & method of application)

Washability

100 – 200 cycles

Overcoat Interval

1 hour

Flash Point

N/A

Mixing Ratio

N/A

Pot Life

N/A

The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.

Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.

Range

Typical

Max

Min

Wet Film Thickness (micron)

300

400

240

Dry Film Thickness (micron)

150

200

120

Temperature

15oC

25oC

40oC

Drying Time (S/D)

2 hours

1 hour

30 minutes

Dry Time (H/D)

6 hours

3 hours

2 hour

Air spray / Airless spray

Knife

Type of Thinner

-       -

Clean water

Volume of Thinner

-       -

Ready for use

Nozzle Orifice

-       -

-

Nozzle Pressure

-       -

-

• Apply 1-2 coats of Rose primer ( RS-6498 ).
• 1coat of Rose Linseed Filler Putty ( RS-6370 )
• Apply 2-3 coats for RS-6398, Rose Marblita Stucco through professional painter with the help of stainless steel spatula and trowel. Make the glossy finish with the help of repeated rubbing.

• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use.

اتصل بنا

هاتف : 6244666 02 966+    فاكس : 6244666 02 966+    صندوق بريد : جدة، المملكة العربية السعودية    بريد إلكتروني : info@rose.com.sa





×
×
أصف للطلبطباعة هذه الصفحة

RS-6498

روز سيلر داخلي

دهان أساس مائي مؤسس على مستحلب الأكريليك املشن.

يستعمل في الداخل على الجدران و الأسقف والأسطح الاسمنتيه والخشبية.

Color

White or any requested color

Finish

Flat

Density (gm/cc)

1.48

Volume Solids %

34%

Theoretical Spreading Rat

11 - 12 متر مربع / لتر عند سماكة 30 ميكرون ( يعتمد على نوع السطح و طريقة التنفيذ )

Washability

200 – 300 دورة

Overcoat Interval

4 hours

Flash Point

N/A

Mixing Ratio

N/A

Pot Life

N/A

The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.

يجب ان يكون السطح نظيفا وجافا وخاليا من أي شوائب أو أغبرة أو زيوت أو تلوثات , ويجب ازالة الدهانات القديمة والمتقشرة .

Range

Typical

Max

Min

Wet Film Thickness (micron)

100

120

100

Dry Film Thickness (micron)

30

40

30

Temperature

15oC

25oC

40oC

Drying Time (S/D)

4 hours

1 hour

30 minutes

Dry Time (H/D)

8 hours

4 hours

2 hours

Air spray / Airless spray

Brush/Roller

Type of Thinner

Clean water

Clean water

Volume of Thinner

0 – 5%   0 – 5%

5 – 10%

Nozzle Orifice

0.022   1.5-2.0mm

-

Nozzle Pressure

2100 psi   3 – 5 bar

-

• عمل 1 طبقة روز ماسونري برايمر (RS-6498).
• عمل 1 – 2 طبقة روز معجون (RS-6350) على سطح نظيف وخالي من الأوساخ والأتربة.
• عمل الطبقة النهائية حسب الدهان المراد طلائه.

• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use.