Rose Linseed Filler
Product Description
A premium quality linseed filler based on an alkali resistant terpolymer acrylic binder. It is unique to all the plaster surfaces, concrete precast, gypsum board , woodwork, drylining and cinderblock.
Principle Uses
It is recommended for both interior and exterior surfaces to provide smooth finish to the top coat. It provides good sanding, adhesion and alkali resistance .
Technical Data
Color |
Off white |
Finish |
Smooth/Flat |
Density (gm/cc) |
1.68 |
Volume Solids % |
47.5% |
Theoretical Spreading Rate |
1.9 - 3.2 sq.mt./ kg (depends upon the substrate condition & method of application) |
Washability |
100 - 150 cycles |
Overcoat Interval |
7 hours |
Flash Point |
N/A |
Mixing Ratio |
N/A |
Pot Life |
N/A |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.
Application Details
Range |
Typical |
Maximum |
Minimum |
Wet Film Thickness (micron) |
200 |
250 |
150 |
Dry Film Thickness (micron) |
95 |
118 |
71 |
Temperature |
15oC |
25oC |
40oC |
Drying Time (S/D) |
4 hours |
2 hours |
1 hour |
Dry Time (H/D) |
9 hours |
7 hours |
5 hours |
Application Guidelines
|
Air spray / Airless spray |
Brush/Roller |
N/A |
- - |
Water |
Type of Thinner |
- - |
Ready for use |
Nozzle Orifice |
- - |
- |
Nozzle Pressure |
- - |
- |
Paint System Advice
• Apply 1 coat of Rose Masonry primer ( RS-6498 )
• Apply RS-6370 Rose linseed filler . It can be sanded when it is completely dry
before application of any top coat.
• Any suitable top coat can be applied over the sanded and cleaned Rose filler.
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .
