Rose Graffiato
Product Description
A high quality granulated texture finish based on acrylic emulsion pigmented with granulates pigments and extenders. It is suitable for interior and exterior walls and cellings resulting in granulated textured finish.
Principal Uses
It is recommended for the interior and exterior substrates like walls of concretes and plasters, cement rendering, blocks, asbestos, plaster board and wood finishes. It is used for wide varieties of texture finishes. Provides water resistant, alkali resistant, good color retention , water-vapour permeable behaviour.
Color |
White or any requested color. |
Finish |
Flat texture |
Density (gm/cc) |
1.85 |
Volume Solids % |
67% |
Theoretical Spreading Rate |
0.3 - 0.4 sq.mt. / kg (depends upon the substrate condition and method of application). |
Washability |
N/A |
Overcoat Interval |
N/A |
Flash Point |
N/A |
Mixing Ratio |
N/A |
Pot Life |
N/A |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.Suitable for application to plaster, brick work, concrete, rendered surfaces and majority of the cement type building surfaces.
Application Details
Range |
Typical |
Maximum |
Minimum |
Wet Film Thickness (micron) |
600 |
800 |
500 |
Dry Film Thickness (micron) |
400 |
535 |
335 |
Temperature |
15oC |
25oC |
40oC |
Drying Time (S/D) |
5 hours |
3 hours |
2 hours |
Dry Time (H/D) |
22 hours |
15 hours |
10 hours |
Application Guidelines
|
Air spray / Airless spray |
Brush/Roller |
Type of Thinner |
Clean Water |
Clean Water |
Volume of Thinner |
- - |
جاهز للاستخدام ا |
Nozzle Orifice |
- |
- |
Nozzle Pressure |
- |
- |
Paint System Advice
• Apply 1 coat of Rose Acrylic Sealer ( Rose No. RS-6499 ) as primer coat.
• Not required any filler coat.
• RS-6230 can be used as granulated texture coat. On drying of texture coat any clear coat , pigmented coat of Chemicoat or Polyurethane can be applied if required.
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use.
