Rosadur Epoxy Primer
Product Description
A superior quality 2 pack epoxy primer based on epoxy resin and polyamide resins. Fractions with epoxy resin is considered as BASE component and fractions with polyamide is considered as HARDENER component .
Principal Uses
It is recommended as a primer coat for the interior surfaces like concretes, cement rendering, gypsum,plasters. It is also recommended for the wooden and metallic surfaces. It provides excellent heat and weather resistance to the substrates, good intercoat adhesion and alkali resistance .
Color |
White or any requested colors. |
Finish |
Matte |
Density (gm/cc) |
1.30 |
Volume Solids % |
49% |
Theoretical Spreading Rat |
12 sq. mt/ lt at 40 micron DFT(depends upon the substrate condition & method of application) |
Washability |
N/A |
Overcoat Interval |
8 hours |
Flash Point |
28 degrees |
Mixing Ratio |
3:1 - Base : Hardener ( v/v ) |
Pot Life |
4 hours |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.
Application Details
Range |
Typical |
Max |
Min |
Wet Film Thickness (micron) |
82 |
102 |
61 |
Dry Film Thickness (micron) |
40 |
50 |
30 |
Temperature |
15oC |
25oC |
40oC |
Drying Time (S/D) |
4 hours |
2 hours |
1 hour |
Dry Time (H/D) |
16 hours |
8 hours |
4 hours |
Application Guidelines
|
Air spray / Airless spray |
Brush/Roller |
Type of Thinner |
Rose Epoxy Thinner |
Rose Epoxy Thinner |
Volume of Thinner |
0 – 5% 15 – 20% |
5 – 10% |
Nozzle Orifice |
0.022 1.5-1.8mm |
- |
Nozzle Pressure |
2100 psi 2 – 3 bar |
- |
Paint System Advice
• 1 coat of epoxy primer ( RS-5770 ) can be applied before the filler coat.
• An epoxy filler ( RS-5780) coat can be applied for the wooden and cementous
surfaces . Normally no filler coat is applied on the metal surfaces unless the
surface is very uneven.
• Any suitable top coat can be applied .
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .
