Rose Zn. phosphate Epoxy Primer
Product Description
A superior quality 2 pack zn.phosphate epoxy primer based on epoxy resin and polyamide resins. Fractions with epoxy resin is considered as BASE component and fractions with polyamide is considered as HARDENER component .
Principal Uses
It is recommended as anti-corrosive primer coat for the interior surfaces of all types of metals. It provides excellent heat and weather resistance to the substrates, good inter-coat adhesion and alkali resistance .
Color |
White or any requested colors. |
Finish |
Matte |
Density (gm/cc) |
1.44 |
Volume Solids % |
53% |
Theoretical Spreading Rat |
13 sq. mt/ lt at 40 micron DFT(depends upon the substrate condition & method of application) |
Washability |
N/A |
Overcoat Interval |
8 hours |
Flash Point |
28 degrees |
Mixing Ratio |
3:1 - Base : Hardener ( v/v ) |
Pot Life |
4 hours |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.
Application Details
Range |
Typical |
Max |
Min |
Wet Film Thickness (micron) |
75 |
102 |
57 |
Dry Film Thickness (micron) |
40 |
50 |
30 |
Temperature |
15oC |
25oC |
40oC |
Drying Time (S/D) |
4 hours |
2 hours |
1 hour |
Dry Time (H/D) |
16 hours |
8 hours |
4 hours |
Application Guidelines
|
Air spray / Airless spray |
Brush/Roller |
Type of Thinner |
روز ايبوكسي تنر |
روز ايبوكسي تنر |
Volume of Thinner |
0 – 5% 15 – 20% |
5 – 10% |
Nozzle Orifice |
0.022 1.5-1.8mm |
- |
Nozzle Pressure |
2100 psi 2 – 3 bar |
- |
Paint System Advice
• 1 coat of zn. phosphate epoxy primer ( RS-5769 ) can be applied before the
filler coat.
• An epoxy filler ( RS-5780) coat can be applied for the wooden and cementous
surfaces . Normally no filler coat is applied on the metal surfaces unless the
surface is very uneven.
• Any suitable top coat can be applied .
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .
