Homepage | Products | Industrial Products |

Rosadur Coal Tar Epoxy

Add to cartPrint

RS-5740

Rosadur Coal Tar Epoxy

A good quality 2 pack coal tar epoxy based on epoxy resin and polyamide resins. Fractions with epoxy resin is considered as HARDENER component and fractions with polyamide is considered as BASE component .

It is recommended as a filler coat for the interior surfaces like concretes, cement rendering, gypsum,plasters. It is also recommended for the wooden and metallic surfaces. It provides heat and weather resistance to the substrates and alkali resistance .

Color

Black

Finish

Matt to semi-glossy

Density (gm/cc)

1.38

Volume Solids %

61%

Theoretical Spreading Rat

6 sq. mt/ lt. at 100 micron DFT(depends upon the substrate condition & method of application)

Washability

N/A

Overcoat Interval

8 hours

Flash Point

28 degrees cel.

Mixing Ratio

3:1 - Base : Hardener

Pot Life

4 hours

The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.

Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.

Range

Typical

Max

Min

Wet Film Thickness (micron)

160

200

130

Dry Film Thickness (micron)

100

120

80

Temperature

15oC

25oC

40oC

Drying Time (S/D)

4 hours

2 hours

1 hour

Dry Time (H/D)

16 hours

8 hours

4 hours

Air spray / Airless spray

Brush/Roller

Type of Thinner

روز ايبوكسي تنر

روز ايبوكسي تنر

Volume of Thinner

0 – 5%   0 – 5%

5 – 10%

Nozzle Orifice

0.022   1.5-2.0mm

-

Nozzle Pressure

2100 psi   2 – 3 bar

-

• 1 coat of epoxy sealer ( RS-5779 ) can be applied before the filler coat.
• Rosadur Coal Tar Epoxy filler( RS-5740) can be applied on the metal surfaces.

• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .

اتصل بنا

هاتف : 6244666 02 966+    فاكس : 6244666 02 966+    صندوق بريد : جدة، المملكة العربية السعودية    بريد إلكتروني : info@rose.com.sa





×
×
أصف للطلبطباعة هذه الصفحة

RS-6498

روز سيلر داخلي

دهان أساس مائي مؤسس على مستحلب الأكريليك املشن.

يستعمل في الداخل على الجدران و الأسقف والأسطح الاسمنتيه والخشبية.

Color

White or any requested colors.

Finish

Matte

Density (gm/cc)

1.48

Volume Solids %

34%

Theoretical Spreading Rat

11 - 12 متر مربع / لتر عند سماكة 30 ميكرون ( يعتمد على نوع السطح و طريقة التنفيذ )

Washability

200 – 300 دورة

Overcoat Interval

4 hours

Flash Point

N/A

Mixing Ratio

N/A

Pot Life

N/A

The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.

Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.

Range

Typical

Max

Min

Wet Film Thickness (micron)

100

120

100

Dry Film Thickness (micron)

30

40

30

Temperature

15oC

25oC

40oC

Drying Time (S/D)

4 hours

1 hour

30 minutes

Dry Time (H/D)

8 hours

4 hours

2 hours

Air spray / Airless spray

Brush/Roller

Type of Thinner

الماء النقي

الماء النقي

Volume of Thinner

0 – 5%   0 – 5%

5 – 10%

Nozzle Orifice

0.022   1.5-2.0mm

-

Nozzle Pressure

2100 psi   3 – 5 bar

-

• عمل 1 طبقة روز ماسونري برايمر (RS-6498).
• عمل 1 – 2 طبقة روز معجون (RS-6350) على سطح نظيف وخالي من الأوساخ والأتربة.
• عمل الطبقة النهائية حسب الدهان المراد طلائه.

• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .