Rosalac N .C. Sanding Sealer
Product Description:
A high quality clear nitrocellulose sealer which renders very fine sanding properties shortly after application. It provides excellent sealing properties through proper penetration inside the pores which results into excellent adhesion.
Principal Uses
It is recommeded for interior and exterior surfaces like wooden blocks and similar substrates. It provides excellent adhesion and very good drying properties.
Color |
Clear |
Finish |
Smooth |
Density (gm/cc) |
0.97 |
Volume Solids % |
37% |
Theoretical Spreading Rat |
15-16 sq. mt/ lt at 20 micron DFT(depends upon the substrate condition |
Washability |
N/A |
Overcoat Interval |
1 hour |
Flash Point |
28 degree |
Mixing Ratio |
N/A |
Pot Life |
N/A |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.
Application Details
Range |
Typical |
Max |
Min |
Wet Film Thickness (micron) |
75 |
90 |
55 |
Dry Film Thickness (micron) |
20 |
25 |
15 |
Temperature |
15oC |
25oC |
40oC |
Drying Time (S/D) |
1 hour |
15 minutes |
10 minutes |
Dry Time (H/D) |
3 hours |
1 hour |
30 minutes |
Application Guidelines
|
Air spray / Airless spray |
Brush/Roller |
Type of Thinner |
Rose NC Thinner |
Rose NC Thinner |
Volume of Thinner |
0 – 5% 10 – 15% |
5 – 10% |
Nozzle Orifice |
0.022 1.5-1.8mm |
- |
Nozzle Pressure |
2100 psi 2 – 3 bar |
- |
Paint System Advice
• Only the sanding sealer can be applied as primer / sealer coat.
• 1-2 coats of Rose N C Gloss Clear Gloss (RS-5506) can be applied over the pre-coated surfaces with sanding sealer .
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .
