Rose N.C. Laq. Primer
Product Description
A high quality nitro-cellulose primer finishes based on high gloss resins applicable for all types of woods. It is basically used for the primer treatment of in-door and out-door furnitures and also for wooden surfaces, cars etc.
Principal Uses
It is recommeded for interior and exterior surfaces like wooden blocks, metal surfaces, concrete and cements plasters etc. It provides good inter-coat adhesion, good sanding and very good drying properties.
Color |
White or any requested colors. |
Finish |
Matte |
Density (gm/cc) |
1.36 |
Volume Solids % |
41% |
Theoretical Spreading Rat |
13-14 sq. mt/ lt at 30 micron DFT(depends upon the substrate condition |
Washability |
N/A |
Overcoat Interval |
1 hour |
Flash Point |
28 degrees cel. |
Mixing Ratio |
N/A |
Pot Life |
N/A |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.
Application Details
Range |
Typical |
Max |
Min |
Wet Film Thickness (micron) |
73 |
97 |
73 |
Dry Film Thickness (micron) |
30 |
40 |
30 |
Temperature |
15oC |
25oC |
40oC |
Drying Time (S/D) |
1 hour |
15 minutes |
10 minutes |
Dry Time (H/D) |
3 hours |
1 hour |
30 minutes |
Application Guidelines
|
Air spray / Airless spray |
Brush/Roller |
Type of Thinner |
Rose NC Thinner |
Rose NC Thinner |
Volume of Thinner |
5 – 10% 15 – 20% |
5 – 10% |
Nozzle Orifice |
0.022 1.0-1.5mm |
- |
Nozzle Pressure |
2100 psi 2 – 3 bar |
- |
Paint System Advice
• 1 coat of nitrocellulose primer ( RS-5580 ) can be applied before the filler coat.
• A suitable filler coat can be applied as required.
• A suitable top coat can be applied as required.
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .
