Rosalac N .C. Gloss White
Product Description
A high quality nitro-cellulose enamel finishes based on high gloss resins applicable for all types of woods. It is basically used for the treatment of in-door and out-door furnitures and also for wooden surfaces, cars etc.
Principal Uses
It is recommeded for interior and exterior surfaces like wooden blocks, metal surfaces, concrete and cements plasters etc. It provides excellent hiding, gloss and very good drying properties.
Color |
White or any requested colors. |
Finish |
لماع |
Density (gm/cc) |
1.09 |
Volume Solids % |
43% |
Theoretical Spreading Rat |
14 sq. mt/ lt at 30 micron DFT(depends upon the substrate condition & method of application) |
Washability |
N/A |
Overcoat Interval |
1 hour |
Flash Point |
28 degrees cel. |
Mixing Ratio |
N/A |
Pot Life |
N/A |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.
Application Details
Range |
Typical |
Max |
Min |
Wet Film Thickness (micron) |
85 |
114 |
88 |
Dry Film Thickness (micron) |
30 |
40 |
30 |
Temperature |
15oC |
25oC |
40oC |
Drying Time (S/D) |
1 hour |
15 minutes |
10 minutes |
Dry Time (H/D) |
3 hours |
1 hour |
30 minutes |
Application Guidelines
|
Air spray / Airless spray |
Brush/Roller |
Type of Thinner |
Rose NC Thinner |
Rose NC Thinner |
Volume of Thinner |
0 – 5% 10 – 15% |
5 – 10% |
Nozzle Orifice |
0.022 1.5-1.8mm |
- |
Nozzle Pressure |
2100 psi 2 – 3 bar |
- |
Paint System Advice
• 1 coat of nitrocellulose primer ( RS-5580 ) can be applied before the filler coat.
• A filler coat can be applied for the wooden and cementous surfaces . Normally no filler coat is applied on the metal surfaces unless the surface is very uneven.
• 1-2 coats of Rose N C Gloss White(RS-5539) can be applied over the primer coat or over the putty coat depending upon the substrate natures.
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .
