Rosalac N .C. Clear Gloss
Product Description
دA high quality clear nitrocellulose lacquers based on high gloss resins applicable for all types of woods. It is suitable as top coat for all types wooden surfaces.
Principal Uses
It is recommeded for interior and exterior surfaces like wooden blocks and similar substrates. It provides excellent gloss and very good drying properties.
Color |
Glossy |
Finish |
لماع |
Density (gm/cc) |
0.98 |
Volume Solids % |
27% |
Theoretical Spreading Rat |
13-14 sq. mt/ lt at 20 micron DFT(depends upon the substrate condition |
Washability |
N/A |
Overcoat Interval |
1 hour |
Flash Point |
28 degrees cel. |
Mixing Ratio |
N/A |
Pot Life |
N/A |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.
Application Details
Range |
Typical |
Max |
Min |
Wet Film Thickness (micron) |
75 |
90 |
55 |
Dry Film Thickness (micron) |
20 |
25 |
15 |
Temperature |
15oC |
25oC |
40oC |
Drying Time (S/D) |
1 hour |
15 minutes |
10 minutes |
Dry Time (H/D) |
3 hours |
1 hour |
30 minutes |
Application Guidelines
|
Air spray / Airless spray |
Brush/Roller |
Type of Thinner |
Rose NC Thinner |
Rose NC Thinner |
Volume of Thinner |
5 – 10% 10 – 15% |
5 – 10% |
Nozzle Orifice |
0.022 1.0-1.5mm |
- |
Nozzle Pressure |
2100 psi 2 – 3 bar |
- |
Paint System Advice
• No primer coat is required . Only the sanding sealer can be applied .
• 1-2 coats of Rose N C Gloss Clear Gloss (RS-5506) can be applied over the pre-coated surfaces with sanding sealer .
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .
