Product Description
An alkyd silver-finish paint based on alkyd resin pigmented with high proportion of leafing aluminium for light and heat reflectance. It has been designed as a finish coat of metallic systems.
Principal Uses
It is recommended for the surfaces of metallic and non-metallic types. It is used as a top coat over the alkyd primers and undercoats. It provides good weather resistance, hiding , heat resistance, heat reflectance and excellent durability.
Color | Silver color |
Finish | Silvery |
Density (gm/cc) | 0.90 |
Volume Solids % |
24% |
Theoretical Spreading Rate |
9.75 sq. mt/ lt at 25 micron DFT(depends upon the substrate condition & method of application) |
Washability |
N/A |
Overcoat Interval |
8 hours |
Flash Point |
38 deg. cel |
Mixing Ratio |
N/A |
Pot Life |
N/A |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.
Application Details
Range | Typical |
Maximum |
Minimum |
Wet Film Thickness (micron) |
104 |
125 |
83 |
Dry Film Thickness (micron) |
25 |
30 |
20 |
Temperature |
15oC |
25oC |
40oC |
Drying Time (S/D) |
4 hours |
2 hours |
1 hour |
Dry Time (H/D) |
12 hours |
8 hours |
4 hours |
Application Guidelines
| Air spray / Airless spray |
Brush/Roller |
Type of Thinner |
Rose Decor Thinner |
Rose Decor Thinner |
Volume of Thinner |
0 – 5% 10 – 15% |
5 – 10% |
Nozzle Orifice |
0.022 1.0-1.5mm |
- |
Nozzle Pressure |
2100 psi 2 – 3 bar |
- |
Paint System Advice
• An alkyd primer coat RS-5340 can be applied on metallic or non-metallic
surfaces.
• No filler coat is required for the same systems.
• 1-2 coats of RS-5380 can be used as a top coat over the alkyd primer coat.
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .
هاتف : 6244666 02 966+ فاكس : 6244666 02 966+ صندوق بريد : جدة، المملكة العربية السعودية بريد إلكتروني : info@rose.com.sa
×Product Description
دهان أساس مائي مؤسس على مستحلب الأكريليك املشن.
Principal Uses
يستعمل في الداخل على الجدران و الأسقف والأسطح الاسمنتيه والخشبية.
المواصفات الفنية
Color | أبيض أو حسب Color المطلوب |
Finish | مطفي |
Density (gm/cc) |
1.48 |
Volume Solids % |
34% |
Theoretical Spreading Rate |
11 - 12 متر مربع / لتر عند سماكة 30 ميكرون ( يعتمد على نوع السطح و طريقة التنفيذ ) |
Washability |
200 – 300 دورة |
Overcoat Interval |
4 ساعات |
Flash Point |
N/A |
Mixing Ratio |
N/A |
Pot Life |
N/A |
Storage
حسب الأنظمة العالمية يجب حفظ المنتج في مكان بارد و جاف وبعيدا عن درجات Temperature العالية والتعرض لأشعة الشمس.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.
Application Details
Range | Typical |
Maximum |
Minimum |
Wet Film Thickness (micron) |
100 |
120 |
100 |
Dry Film Thickness (micron) |
30 |
40 |
30 |
Temperature |
15oC |
25oC |
40oC |
Drying Time (S/D) |
4 ساعات |
1 ساعة |
30 دقيقة |
Dry Time (H/D) |
8 ساعات |
4 ساعات |
2 ساعات |
Application Details
| Air spray / Airless spray |
Brush/Roller |
Type of Thinner |
الماء النقي |
الماء النقي |
Volume of Thinner |
0 – 5% 0 – 5% |
5 – 10% |
Nozzle Orifice |
0.022 1.5-2.0mm |
- |
Nozzle Pressure |
2100 psi 3 – 5 bar |
- |
Paint System Advice
• عمل 1 طبقة روز ماسونري برايمر (RS-6498).
• عمل 1 – 2 طبقة روز معجون (RS-6350) على سطح نظيف وخالي من الأوساخ والأتربة.
• عمل الطبقة النهائية حسب الدهان المراد طلائه.
Safety Precaution
• تجنب ملامسة العين و الجلد .
• في حالة ملامسة العين و الجلد يجب Washability بالماء و الصابون و استشارة الطبيب فورا .
• يجب اغلاق العبوة جيدا في حالة عدم الاستخدام .